Altavoz portátil resistente al agua JBL Go 3 - Negro

Our JBL Go 3 can only connect to one device at a time. You just need to turn off the Bluetooth connection from your first device and connect to the second device by enabling a Bluetooth connection.

When the light indicator between the power button and the Bluetooth button turns off, it indicates that your JBL Go 3 speaker is fully charged. The red steady light means that the device is charging while the red blinking light means the unit has a low battery.

Thanks for your inquiry. Our JBL Go 3 is a stand-alone Bluetooth speaker. It will not be able to connect to other speakers and stereo systems.

Our JBL Go 3 is IP67 waterproof and dustproof. The rubber flap covering serves as protection from dirt and even water as this part isn't waterproof unless the port is closed. Please make sure that the unit is dry or free from moisture before charging.

Our JBL Go 3 does not have a function to connect with other speakers, and our JBL soundbar is a stand-alone speaker system that doesn't require additional speakers to be connected.

Yes. Our JBL Go 3 can be connected to any Bluetooth-capable source device.

Thanks for your inquiry. Our JBL Go 3 is compatible with both Android and iOS mobile devices. Please make sure that the Bluetooth of your source device is on, and there are no other source connected. You can try resetting the speaker and manual pairing procedure. First, power on the speaker. Press and hold the Volume + button and the Bluetooth button together for 3-5 seconds until the speaker turns off. Once turned off, the speaker has been reset to the factory default settings. Then, turn your Bluetooth back on your mobile device and power on the speaker. It should automatically go into pairing mode and pop up on your discoverable BT devices. Choose the JBL GO 3, and now the speaker should be connect to your device. If these steps do not fix the problem, please reach out to our customer support.

Our JBL Go 3 is rated IPX67 protecting the product from submersion in 1 meter (3.3 feet) of water for up to 30 minutes, but it is also resistant to dust. Dust accumulation around electronics can lead to hardware failure so the IP67 rating is an extremely beneficial addition to this product. Always close the rubber flap of the speaker as the rubber flap covering serves as protection from dirt and even water as this part isn't waterproof unless the port is closed.

Prop 65 is included on the majority of our products to create awareness of possible Prop 65-listed chemicals being present. Please note that when used as intended, our products are absolutely safe to use and comply with all regulations. For a deeper explanation on Prop 65, please go to https://oehha.ca.gov/proposition-65/general-info/proposition-65-plain-language

You may use any Type-C charging cable as a replacement. You may also order a JBL Type-C cable through our Customer Service for parts replacement. Here's the link. https://support.jbl.com/us/en/#contact