JBL PartyBox 110​​ 

Thanks for your question. To utilize the built-in battery of your JBL PartyBox 110, simply disconnect the AC power cord from the AC input after charging the speaker. Please note that this power cord serves a dual purpose, allowing you to charge the built-in battery as well as power the speaker from an AC outlet when the battery is not in use.

Thanks for your question. For further assistance with your inquiry, you may reach out to our customer support in Iraq. Please see their contact details below. Tel: +971 4 8873336 Email: info@harmanme.com / sales@harmanme.com / servicecentre@harmanme.com

Thanks for your question. Our JBL PartBox 110 cannot be connected to a car radio through the cigarette port, it does not have a designed feature for integration with a car radio port.

Thanks for your inquiry. Our JBL PartyBox 110 does not have a strap hook to attach a carabineer. You might want to check out our JBL PartyBox On-The-Go as it has an integrated carabiner attached to the speaker. If you need more help, please contact our customer support.

Thanks for reaching out. You can connect two or more JBL PartyBox 110 via a Daisy chain or wired connection using a 3.5mm cable to the Aux in/out ports of the speakers. If you need more help, please contact our customer support. We're here to help.

Thanks for reaching out. You can connect 2 or more JBL PartyBox 110 via Daisy chain or wired connection using a 3.5mm cable to the Aux in/out ports of the speakers. If you need more help, please contact our customer support. We're here to help.

Our JBL PartyBox 110 has a built-in charge management IC and protection circuit module that manages and detects charging. There's no harm in having your JBL speaker plugged in. However, if you want to save energy, please disconnect from charging.

Thanks for your question. Our JBL Partybox 110 works well with 120V and 220V. Thanks to the included adapter, which is auto-volt. The unit can be used for 120V - 240V.

Thanks for reaching out. You can connect multiple JBL PartyBox 110 via daisy chain connection using the 3.5mm audio cable. To set up multiple JBL PartyBox 110 via daisy chain, connect an audio cable from the aux out of the first speaker to the aux-in of the second speaker. Next, connect the aux out of the second speaker to the aux-in of the third speaker using another audio cable. The same step continues until the aux-in of the fifth speaker is connected. When doing this setup, please ensure aux inputs and outputs are free from dirt or debris while the audio cables are securely connected. If you need more help, please don't hesitate to reach out to our Customer Support for further assistance.

Thanks for your inquiry. The connectivity of our JBL Partybox 110 is limited to Party 100 via Daisy Chain, which involves linking both speakers using an Aux cord.