LG G5 Software Update

To help you with the mandatory software update for your device, this page contains the following information:

• Software Update Instructions - User initiated over the air (OTA)
• Software Update Instructions - Server initiated OTA
• Updating while roaming
• Insufficient device memory alert
• Battery life expectations after a major software update

User initiated OTA

To start the download:

1. Start on the Home screen by tapping the Menu Key
2. Toca Configuración
3. Oprime About Phone
4. Oprime Software updates
5. Oprime Check for Update
6. Oprime Download Now

When download is complete, a screen will appear advising you that the new version of software is ready to be installed.

Oprime Install Now (Instalar ahora).

The device will power down and restart. A screen will appear stating that the installation has been completed. Toca OK.

Server initiated OTA

Once a new software version is available for your device, it'll begin downloading in the background.

When the download is complete, you'll be notified that it is ready to be installed.

Tap Install Now and the device will power down and restart. A screen will appear stating that the installation has been completed. Toca OK.

To check your software version from the home screen:

• Oprime Menu
• Toca Configuración
• Oprime About Phone

Updating while roaming

You won't receive a software update notice if you're roaming. You'll need to be connected to Wi-Fi to update your device while roaming.

To enable Wi-Fi on your device, go to Settings under Wireless & Networks and tap Wi-Fi ON to enable (if not already enabled).

Tap Wi-Fi to view and select a Wi-Fi network.

Once you're connected, an update notification will appear on your device. If the software update fails to install, you'll get an error screen, though this only means the software didn't install properly. Remove and re-insert the battery, and power your device back on. The device will restart with the original software and will prompt you once again to install the software update.

Insufficient Device Memory

Due to changes in the Android OS, you'll need sufficient reserved memory for a software upgrade. If you don't have enough user memory, a Low Memory pop-up screen will be shown until you free up enough memory. Eliminating unused apps, and clearing videos or photos can help free up device memory. If you dismiss the notification and have not cleared space after 24 hours, a pre-update message will pop up again until you free up the memory necessary to perform the software update.

Battery life expectations after a major software update:

• The application memory may have to be optimized. This can take time and cause the device to temporarily use more battery while the optimization is in progress.
• Downloaded apps may not be optimized, as app developers don't immediately update their apps to support new versions of the OS. This may result in higher than normal battery drain, and in some cases device sluggishness, until apps are updated or removed.
• It can take 2 to 3 days for the device's battery life to normalize.

Software Upgrade Assistant Tool

Si no tienes una conexión potente a Wi-Fi o de la red de Verizon Wireless, no podrás realizar la descarga de la actualización de software por aire. En lugar de ello, puedes conectar tu dispositivo a una computadora con acceso a Internet. Connect your device to your computer using your USB cable, then download the Software Upgrade Assistant tool to your computer, which will check for software updates and initiate the software update process.